E mild steel plate,a 283 gr. c steel plate,09CuPCrNi-A,a516gr70 a285c,asme sa537cl2 factory

HOME >

Capable Classification Society Quality Authentication from LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS,ASTM A131 Grade E shipbuilding steel is not only the common tensile strength steel but also is the Hull structural steel. Grade E shipbuilding steel has good toughness properties, higher strength,strong corrosion-resistance,the processing properties,and good welding properties. Shipbuilding steel grade E is used for shipbuilding and oil platform purpose and they are approved by ABS,DNV,GL,BV,LR,NK,RINA and other classification societies. What's more,the A shipbuilding steel E can be used in the manufacture of the ship's hull structure whose weight is below 10000 tons,and usually do navigation around coastal and river area.

Grade E shipbuilding steel plate specification:
Thickness: 6mm-200mm, Width: 1500mm-4000mm, Length: 6000mm-180000mm

Grade E shipbuilding steel Chemical Composition

Grade	C max	Si max	Mn	P max	S max	Als min
Grade E	0.18	0.35	0.70-1.20	0.035	0.035	0.015

Note: CE: C+1/6Mn ≤ 0.40% Cu ≤ 0.35%,Ni ≤ 0.30%≤

Grade E shipbuilding steel Mechanical Property

Grade	Rm (MPa)	Re(MPa) min	A% min	Akv/J min
Grade E	400-520	235	22	E.T °C	Thickness (mm)
				-40	≤ 50		>50-70		>70-100
					L	C	L	C	L	C
					27	20	34	24	41	27

Note: In the list , Rm: tensile strength,Re: Yield strength,A%: elongation, E.T: experimental temperature,L: lengthways, C: crosswise.

Grade E shipbuilding steel Condition Of Delivery

Grade	category	The thickness of steel
		≤ 12	>12.5-25	>25-35	>35-50	>50-100
Grade E	Plate/sheet	N,TM
	Profile steel	N(25),TM(25),AR(15),CR(15)				-

Note: 1. delivery condition: A =Any ; N=Normalized ; CR=Control Rolled ; TM=TMPC, Temperature - deformation control rolling; AR*= Can be hot rolled with the agreement of Classification Society ; CR*=Can be control rolled with the agreement of Classification Society .
2. The Figure in the ( ) means the sampling volume to do the impact test, the unit is Ton.(-) means without impact test.

E steel Contrast in the different standard

ASTM A131M	TOCT 5521	JIS G3106	BS LR	GB712
Grade E	Grade E	SM400B SM400C	Grade E	Grade E

Grade E shipbuilding steel Available Specification

variety		Thickness (mm)	Width (mm)	Longth/ inner diameter (mm)
Shipbuilidng plate	cutting edges	6~200	1500~3000	3000~15000
	non- cutting edges		1300~3000
Shipbuilidng coil	cutting edges	1.2~19	1500~2000	760+20~760-70
	non-cutting edges		1510~2010

Grade E shipbuilding steel theoretical weight

Thickness (mm)	theoretical weight		Thickness (mm)	theoretical weight
Thickness (mm)	Kg/ft2	Kg/m2	Thickness (mm)	Kg/ ft2	Kg/m2
6	4.376	47.10	25	18.962	196.25
7	5.105	54.95	26	20.420	204.10
8	5.834	62.80	28	21.879	219.80
10	7.293	78.50	30	23.337	235.50
11	8.751	86.35	32	25.525	251.20
12	10.21	94.20	34	26.254	266.90
14	10.939	109.90	35	27.713	274.75
16	11.669	125.60	40	29.172	314.00
18	13.127	141.30	45	32.818	353.25
20	14.586	157.00	48	35.006	376.80
22	16.044	172.70	50	36.464	392.50
24	18.232	188.40

Grade E shipbuilding steel dimensional deviation

nominal thickness（mm）	The thickness deviation with following width (mm)
nominal thickness（mm）	≤1200	>1200~1500	>1500~1800	>1800
>6.0~8.0	±0.29	±0.30	±0.31	±0.35
>8.0~10.0	±0.32	±0.33	±0.34	±0.35
>10.0~12.0	±0.35	±0.36	±0.37	±0.43

nominal thickness（mm）	minus deviation (mm)	The thickness deviation with following width (mm)
nominal thickness（mm）	minus deviation (mm)	> 1000 ~1200	> 1200 ~1500	> 1500 ~1700	> 1700 ~1800	> 1800 ~2000	> 2000 ~2300	> 2300 ~2500	> 2500 ~2600	2600 ~2800	> 2800 ~3000
>12~25	-0.8	+0.2	+0.2	+0.3	+0.4	+0.6	+0.8	+0.8	+1.0	+1.1	+1.2
>25~30	-0.9	+0.2	+0.2	+0.3	+0.4	+0.6	+0.8	+0.9	+1.0	+1.1	+1.2
>30~34	-1.0	+0.2	+0.3	+0.3	+0.4	+0.6	+0.8	+0.9	+1.0	+1.2	+1.3
>34~40	-1.1	+0.3	+0.4	+0.5	+0.6	+0.7	+0.9	+1.0	+1.1	+1.3	+1.4
>40~45	-1.2	+0.4	+0.5	+0.6	+0.7	+0.8	+1.0	+1.1	+1.2	+1.4	+1.5

as a Grade E shipbuilding steel supplier in China , more infotmation about Grade E shipbuilding steel, please contact us.

Kindly send email to sales4@bebonchina.com, The professional team will support your work as one-to-one.
At last, Welcome to Visit our mill for long coopeation and checking steel quality in any time.

Henan BEBON international co.,ltd located in zhengzhou ,henan province of china. Since it was established in 2008, Henan BEBON has earned an outstanding reputation for its profession in exporting shipbuilding steel. About the products, we are mainly specialized in steel products for shipbuilding which have been products for shipbuilding which have been approved by some authoritative classification societies,likeLR,BV,ABS,DNV,GL and so on.

Steel Products

Steel Standard

steel list

LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS, Grade E Shipbuilding steel plate